Mühendislik için yapay zekâ promptları

photorealistic architectural visualization, a minimalist three-story single-family residence, board-formed concrete and corten steel facade, set in a dense pine forest during golden hour, volumetric light rays filtering through the trees, calm and monolithic atmosphere, wide-angle shot from a low perspective, shot on a Canon EF 16-35mm f/2.8L III USM lens --ar 16:9 --style raw --v 8.2

sectional perspective, through a double-height library space in a contemporary art museum, exposed structural steel trusses and CLT (cross-laminated timber) panels, populated with people, diffuse daylight from a north-facing curtain wall, captured with a tilt-shift lens to maintain vertical lines, style of a high-quality architectural render like those by MIR.no --ar 4:5 --v 8.2

a parametric performing arts center, fluid and dynamic form with sweeping curves, facade of white glass-fiber reinforced concrete panels, integrated public plaza, dramatic nighttime lighting, in the signature style of Zaha Hadid, aerial drone perspective --ar 16:9 --v 8.2

[[upload sketch image]] photorealistic render of this sketch, a modern cabin with a standing-seam metal roof and charred wood (Shou Sugi Ban) cladding, surrounded by a snowy landscape, warm light glowing from within, dusk setting --ar 3:2 --iw .75 --v 8.2

eye-level street view of a mixed-use urban infill project in a historic brick warehouse district, ground floor retail with residential above, facade of dark ironspot brick and large industrial-style windows, show context of adjacent historic buildings, overcast day for soft shadows, photorealistic --ar 16:9 --v 8.2

Act as a senior planner. For a property at [[Address, City, State, ZIP]], research the primary zoning designation. Provide a summary table including: Zoning District, Permitted Uses, Max Building Height, Max FAR/Lot Coverage, and required setbacks (front, side, rear). Cite the relevant municipal code sections for each item. State clearly that this is a preliminary summary and must be verified with the local planning department.

Act as a certified ADA compliance consultant. Generate a design checklist for a new construction, 3,000 sq ft single-story retail space in the USA, based on the 2010 ADA Standards for Accessible Design. Focus on Chapter 4: Accessible Routes and Chapter 6: Plumbing Elements. Format as a checklist with code references for each item.

Given the following occupancy data for a floor plan: [Office Area 1: 50 occupants, Conference Room: 20 occupants, Corridor: 15 occupants]. Assuming this is a business occupancy (Group B) under IBC 2021, calculate the minimum required egress width for the main exit corridor serving all three spaces. Show your step-by-step calculation, citing the relevant IBC sections for occupant load factor and egress width per occupant.

Draft a specification outline in CSI MasterFormat (3-Part) for "Section 09 65 19 - Resilient Tile Flooring". Include placeholder text in each part (General, Products, Execution) for a high-traffic public school corridor. Under "Products," list requirements for material composition, dimensions, slip resistance (ASTM D2047), and low-VOC compliance.

For a new 50,000 sq ft office building project, provide a high-level feasibility summary for achieving the LEED v4.1 BD+C credit "Low-Emitting Materials." List the different categories of materials covered by the credit and the general requirements for compliance (e.g., VOC content, emissions testing).

Generate building massing options on a 150' x 400' site. Constraints: 10' front setback, 0' side and rear setbacks. Objective: Maximize Gross Floor Area (GFA) while adhering to a maximum Floor Area Ratio (FAR) of 5.0 and a maximum height of 150'. Provide at least 3 distinct massing strategies (e.g., podium-tower, C-shape, U-shape).

Generate apartment building floor plates for a site with a 60' x 120' core-to-exterior dimension. The target unit mix is 50% one-bedroom (approx. 650 sq ft), 30% two-bedroom (approx. 950 sq ft), and 20% studio (approx. 450 sq ft). Optimize for a double-loaded corridor configuration and maximize net rentable area.

Define a rule for panelizing a building facade. The facade is 100' wide by 200' tall. The panels should be rectangular, with a maximum size of 4' x 8'. Introduce a random variation in panel width between 2' and 4' while maintaining a constant height of 8'. The panel material is [[Material]].

Analyze a rectangular building mass of 50'x150'x60'(H) for daylight autonomy (sDA). Rotate the building on its center point from 0 to 90 degrees in 15-degree increments. For each increment, report the percentage of floor area that achieves sDA300,50%. Identify the optimal building orientation for maximizing daylight.

Generate a structural grid for a 200' x 300' single-story warehouse. The primary objective is to maximize open floor space. The structural system is steel frame. Evaluate and compare grid spacing options of 40'x40', 50'x50', and 60'x60'. Report the number of interior columns for each option.

Act as an experienced project architect. Read the following client email and extract a structured design brief. [[Paste client email here]]. Organize the output into these headings: Project Goals, Key Adjectives/Feelings, Functional Requirements, Budget & Timeline, and 'Red Flags' or Areas Needing Clarification.

Draft a professional and firm email to a client who has requested a new design feature that is outside the original scope of work. The project is [[Project Name]]. The request is [[Client's Request]]. The email should: 1) Acknowledge and validate their idea. 2) Gently explain that it falls outside the current scope. 3) Frame it as an "Additional Service" and propose discussing it as a potential change order. 4) Reiterate enthusiasm for the core project.

Generate a 60-minute agenda for a "Schematic Design Review" meeting with a residential client. Then, using the same agenda, draft a follow-up email template summarizing the meeting, listing "Decisions Made," "Action Items" (with assigned owners and due dates), and "Items for Further Discussion.

A contractor has submitted an RFI for [[Project Name]]. The RFI states: [Paste RFI text, e.g., "Drawing A4.1 shows a 6" wall, but the structural drawing S2.0 implies an 8" wall. Please clarify."]. Draft a clear and concise response. Assume the correct wall thickness is 8". Instruct the contractor to proceed based on the structural drawings and state that the architectural drawings will be updated in the next issuance.

Create a template for an architectural services fee proposal for a new custom home project. The structure should include: Project Understanding, Scope of Basic Services (broken down by phase: SD, DD, CD, Bidding, CA), Excluded Services, Fee Structure (proposing a % of construction cost, with options for hourly), and Terms & Conditions.

Act as a sustainability consultant. Compare the typical embodied carbon (in kgCO2e/m²) of three common flooring options for a commercial office: 1) Polished Concrete Slab, 2) Carpet Tile with recycled content, and 3) Engineered Hardwood. Present the results in a simple table and briefly explain the main drivers of embodied carbon for each.

Generate a list of 5 evidence-based biophilic design strategies applicable to a high-stress healthcare environment, such as a hospital waiting room. For each strategy, provide the name (e.g., "Visual Connection with Nature"), a brief implementation example, and the expected psychological benefit for patients and staff.

I need to source materials for a temporary installation with a focus on circular economy principles. Generate a list of material categories that are either: 1) Highly reusable with minimal reprocessing, 2) Made from a high percentage of post-consumer recycled content, or 3) Certified compostable. For each category, provide one example material.

For a residential project in Climate Zone 5 (e.g., Chicago, IL), outline the top 3 most critical passive house design strategies to prioritize. Explain why each is crucial for this specific climate (cold winters, warm summers) and provide a target performance metric for each (e.g., U-value for windows, ACH50 for air tightness).

For a project located in [[City, State]], generate a list of common, durable exterior building materials that are typically manufactured or quarried within a 500-mile radius. Include categories for masonry, wood siding, and stone. This is for preliminary research for LEED MR Credit: Building Product Disclosure and Optimization - Sourcing of Raw Materials.